SUMMARY: Perform all maintenance requirements throughout the plant.
PRIMARY RESPONSIBILITIES:
KNOWLEDGE, SKILLS, AND ABILITIES:
CHEMICALS USED: All chemicals throughout the plant See SDS listings.
WORKING CONDITIONS:
Environment: Enclosed structure with moderate temperatures ranging from 55 degrees to 100 degrees. Higher temperatures near the oven for short periods of time. Noise levels up to 94db. All work is performed at the normal standing level. Plant environment is clean and safe with a focus on 5S.
Standing and walking: 90% of time
Bending: 10% of time
Climbing: 0%
Lifting: Average weight: 10 lbs., Average height: 2 feet
Work areas over 4 feet off floor unprotected by guardrails: 0
Work time on knees: 0
Knee pads required: NO
Hard hats required: YES, while working with crane
Safety Shoes required: YES
Hearing protection: YES
Safety glasses or side shields: YES
Safety harness required while working with lift
PRIMARY RESPONSIBILITIES:
- Dismantles machines or equipment, replaces defective parts, and adjusts feed mechanisms.
- Cleans and lubricates machine parts such as shafts, pulleys, gears, and bearings.
- Replaces or repairs machine belts.
- Removes dust, dirt, grease, and waste material from machines.
- Paints machines or equipment to prevent corrosion.
- Bends and cuts conduit and wire, and drills holes in walls, floors, and ceilings for electrical connections.
- Bends, cuts, and threads pipe, cuts openings in walls, ceilings, and floors for pipes, and seals pipe joints with sealing compound.
- Cuts out and joins parts for worktables, benches, shelves, and other furnishings.
- Patches or replaces plaster or plaster board and paints walls, ceilings, and trim of building.
- Clears clogged drains and replaces plumbing fixtures.
- Operates welding machine to repair or join metal parts.
- Performs preventative maintenance work orders on a timely basis.
- Cleans work area, tools, and equipment.
- Prepares and sets up machinery for scheduled production runs.
- Complies with all Environment Health and Safety Rules.
- Perform other duties as assigned by Supervisor.
- Perform routine maintenance on all equipment directly or indirectly related to the production operations.
- Perform changeovers and start-up operations.
- Participate in idea program, collective system design and production meetings.
KNOWLEDGE, SKILLS, AND ABILITIES:
- Certified forklift operator.
- Attention to detail in the workplace.
- Able to lift 25 lbs. (routinely) & 50 lbs. occasionally.
- Available for overtime before and after shifts and weekends.
- Organized and able to read and follow instructions.
- Proven prior maintenance work experience
- Good mathematical and reasoning skills.
- Electrical knowledge preferred.
CHEMICALS USED: All chemicals throughout the plant See SDS listings.
WORKING CONDITIONS:
Environment: Enclosed structure with moderate temperatures ranging from 55 degrees to 100 degrees. Higher temperatures near the oven for short periods of time. Noise levels up to 94db. All work is performed at the normal standing level. Plant environment is clean and safe with a focus on 5S.
Standing and walking: 90% of time
Bending: 10% of time
Climbing: 0%
Lifting: Average weight: 10 lbs., Average height: 2 feet
Work areas over 4 feet off floor unprotected by guardrails: 0
Work time on knees: 0
Knee pads required: NO
Hard hats required: YES, while working with crane
Safety Shoes required: YES
Hearing protection: YES
Safety glasses or side shields: YES
Safety harness required while working with lift
